ไมโครโฟน Rode NTG2 Battery or Phantom Powered ไมค์เหมาะสำหรับงาน Broadcast หรือ Studio ชนิดคอนเด็นเซอร์ มีรูปแบบการรับเสียงแบบ Supercardioid ตอบสนองความถี่ 20Hz to 20kHz Output Impedance 250 Ω
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.
Quality Sound Capture
The combination of the NTG2’s 11″ long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
Battery or Phantom Powered
Thanks to its 3-pin XLR output and operability with 48V phantom power or a single AA battery, the NTG2 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on cameras and camcorders.
Ideal for Boompole Mounting
The NTG2 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG2 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.
Windscreen Minimizes Wind Noise
The NTG2 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).
Power
P48 (48V) phantom supply or 1.5V AA battery
Acoustic Principle
Line gradient
Directional Pattern
Super Cardioid
Frequency range
20Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
Output impedance
250Ω (phantom), 350Ω (battery)
Signal noise ratio
76 dB SPL (A – weighted per IEC651)
Equivalent noise
18 dB SPL (A – weighted per IEC651)
Maximum SPL
131dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum output voltage
-15.4dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
อุปกรณ์วีดีโอ ไมโครโฟน และหูฟัง - Video & Mics & Headphone, ไมค์ และอุปกรณ์เสียง - Audio & Microphones, Shotgun Microphones
81Coin
อุปกรณ์วีดีโอ ไมโครโฟน และหูฟัง - Video & Mics & Headphone, ไมค์ และอุปกรณ์เสียง - Audio & Microphones, Shotgun Microphones
อุปกรณ์วีดีโอ ไมโครโฟน และหูฟัง - Video & Mics & Headphone, ไมค์ และอุปกรณ์เสียง - Audio & Microphones, Shotgun Microphones
อุปกรณ์วีดีโอ ไมโครโฟน และหูฟัง - Video & Mics & Headphone, ไมค์ และอุปกรณ์เสียง - Audio & Microphones, อุปกรณ์ไมค์ สาย - Cable & Mic Accessories
There are no reviews yet.