Pelican 1560TP Case with TrekPak Divider System Black
เคสแข็ง Pelican 1560TP พร้อมระบบ TrekPak Divider เป็นเคสแข็งที่ทนทาน กันน้ำ กันลม กันฝุ่น ทนสารเคมี และป้องกันการกัดกร่อน ใช้สำหรับพกพาอุปกรณ์ทุกชนิดที่ต้องได้รับการปกป้องจากองค์ประกอบต่างๆ มันทำจากโคพอลิเมอร์ที่มีโครงสร้างรับแรงกระแทกสูงเป็นพิเศษทำให้แข็งแรงและทนทานเป็นพิเศษ มีโอริงนีโอพรีน 0.25″ (6.4 มม.) สลักสองทางเปิดง่ายสองอันที่ปิดสนิท มีวาล์วปรับสมดุลแรงดันอัตโนมัติในตัวสำหรับการเปลี่ยนแปลงระดับความสูงหรืออุณหภูมิ ตัวเรือนใช้ฮาร์ดแวร์สแตนเลสและ มีตัวป้องกันแม่กุญแจเพื่อเพิ่มความแข็งแรงและความปลอดภัยเป็นพิเศษต่อการตัดและการโจรกรรม มาพร้อมที่จับด้านบนและด้านข้างที่เป็นยางขึ้นรูปที่สะดวกสบาย ที่จับส่วนต่อดึงแบบยืดหดได้ และล้อในตัว
นอกจากน้ำหนักเบากว่าตัวแบ่งแบบฟองน้ำแบบเดิมแล้ว TrekPak Divider System และใช้ส่วนผนังที่ติดตั้งไว้ล่วงหน้า แผงกั้น หมุดล็อค และเครื่องมือตัดที่ใช้งานง่าย เพียงวางอุปกรณ์ของคุณในกล่อง วัดและตัดส่วนแบ่ง แล้วล็อคเข้าที่ด้วยหมุดตัว U เหล็ก มีวัสดุแบ่งเพิ่มเติมสำหรับกรณีที่ความต้องการอุปกรณ์ของคุณแตกต่างกันไป ส่วนแบ่งความหนา 7/16″ ทำจากโฟมเซลล์ปิดแบบกันน้ำที่เคลือบเป็นแผ่นพลาสติกลูกฟูกที่แข็งแรง ซึ่งทนทานต่อการฉีกขาดและการหั่นเป็นชิ้น TrekPak รวมกับโฟมด้านล่าง 1 นิ้วและโฟมที่ฝาปิดเพื่อให้เกียร์ของคุณหมุนได้ 360 องศา การป้องกัน เคส 1560 ได้รับการเข้ารหัสโดย NATO และผ่านการทดสอบตามข้อกำหนด IP-67 (การป้องกันน้ำเข้า) และข้อกำหนดของ Def Stan 81-41/STANAG 4280
โครงสร้าง
- โคพอลิเมอร์โครงสร้างแรงกระแทกสูงพิเศษ
- TrekPak แบบมีเส้นรอบวงสองชิ้น ขนาด 12 นิ้ว 2 อัน ขนาด 23 นิ้ว 2 อัน เครื่องมือคัตเตอร์ หมุด 30 อันพร้อมแถบดึงสีแดง 30 อัน บวกกับชิ้นส่วนโฟมด้านบนและด้านล่าง
- สลักแบบโยนคู่เปิดง่าย
- วาล์วปรับแรงดันอัตโนมัติในตัว
- ฮาร์ดแวร์สแตนเลส
- ตัวป้องกันแม่กุญแจ
The Pelican 1560TP Case with TrekPak Divider System (Black) is a durable, watertight, airtight, dust-proof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of ultra-high impact structural copolymer that makes it extremely strong and durable. It has a 0.25″ (6.4 mm) neoprene o-ring, two easy-open double throw latches that seal perfectly. It has a built-in, automatic pressure equalization valve for changes in altitude or temperature. The case uses stainless steel hardware and has padlock protectors to provide added strength and extra security against cutting and theft. It is carried by a comfortable rubber over-molded top and side handles, retractable pull extension handle and built-in wheels.
Besides being lighter than traditional padded dividers, the TrekPak Divider System and uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. 7/16″ thick divider sections are made of waterproof, closed cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with 1″ bottom foam and lid foam to give your gear 360-degree protection. The 1560 case is NATO-codified and tested to IP-67 (Ingress Protection)and Def Stan 81-41/STANAG 4280 requirements.
Construction
- Ultra-high Impact structural copolymer
- TrekPak insert with two perimeter pieces, two 12″ dividers, two 23″ dividers, cutter tool, 30 pins with 30 red pull tabs, plus a top and bottom foam piece.
- Easy open double throw latches
- Built-in automatic pressure equalization valve
- Stainless steel hardware
- Padlock protectors
Carrying options
- Comfortable rubber over-molded side and top handles
- Retractable pull handle
- Built-in 2″ hard rubber transport wheels
1560 Case Certificates
- IP67 (1 meter submersion for 30 minutes) (Ingress Protection)
- MIL C-4150J (Military Standard)
- Def Stan 81-41/STANAG 4280
In the Box
- Pelican 1560TP Case with TrekPak Divider System (Black)
- Pelican 1563 O-Ring – for Pelican 1560 Series Cases (Replacement)
- TrekPak Divider Kit for Pelican 1560 Large Protector Case
There are no reviews yet.